I need to sell off some stuff to make a house payment. I need to sell before New Years. Up for sale is a pair of those 1U servers that have been going around for a bit. They're configured with Celeron D 320 2.4GHz CPU on Biostar U8668-D mobos with 80GB IDE drive and 512MB RAM in SuperMicro SC512L-260B 1U cases. I can sell them for $200 each, non-negotiable unless you'd like to give me more for some reason. ;)
I also have an old HP Pavillion 4453 with an AMD K6-380 and 6-8GB HDD (I'll check if anyone is interested) with the matching 15" CRT monitor. It's got the stock 64MB DIMM in it, but I have extras so I can throw in a 128MB DIMM or two if interested too. An old Monorail workstation with a Tyan Tigercub 100 ( S1894) and a Celeron 400. I also just put together a tower with a Tualatin P3-S 1.26GHz on a DFI CM33-TL Rev C mobo if there is interest for it (48-bit LBA and USB booting) 512MB w/ 20GB IDE & CD-ROM. The Tualatin would match/beat most early P4 systems and use less power/put out less heat; it would make a fine setup to put a 1U hs/fan on and stick in a 1U case for a low power sever. Reasonable offers please.
Thanks, Jon.
UPDATE: One 1U server is pending sale, the rest is still available.
Jon.
On Dec 12, 2007 5:57 PM, Jon Pruente jdpruente@gmail.com wrote:
I need to sell off some stuff to make a house payment. I need to sell before New Years. Up for sale is a pair of those 1U servers that have been going around for a bit. They're configured with Celeron D 320 2.4GHz CPU on Biostar U8668-D mobos with 80GB IDE drive and 512MB RAM in SuperMicro SC512L-260B 1U cases. I can sell them for $200 each, non-negotiable unless you'd like to give me more for some reason. ;)
I also have an old HP Pavillion 4453 with an AMD K6-380 and 6-8GB HDD (I'll check if anyone is interested) with the matching 15" CRT monitor. It's got the stock 64MB DIMM in it, but I have extras so I can throw in a 128MB DIMM or two if interested too. An old Monorail workstation with a Tyan Tigercub 100 ( S1894) and a Celeron 400. I also just put together a tower with a Tualatin P3-S 1.26GHz on a DFI CM33-TL Rev C mobo if there is interest for it (48-bit LBA and USB booting) 512MB w/ 20GB IDE & CD-ROM. The Tualatin would match/beat most early P4 systems and use less power/put out less heat; it would make a fine setup to put a 1U hs/fan on and stick in a 1U case for a low power sever. Reasonable offers please.
Thanks, Jon.
UPDATE 2: One 1U server is sold, the rest is still pending. Selling one of the servers should be enough to get me through, but selling more is always best.
Thanks, Jon.
On Dec 13, 2007 9:09 AM, Jon Pruente jdpruente@gmail.com wrote:
UPDATE: One 1U server is pending sale, the rest is still available.
Jon.
On Dec 12, 2007 5:57 PM, Jon Pruente jdpruente@gmail.com wrote:
I need to sell off some stuff to make a house payment. I need to sell before New Years. Up for sale is a pair of those 1U servers that have been going around for a bit. They're configured with Celeron D 320 2.4GHz CPU on Biostar U8668-D mobos with 80GB IDE drive and 512MB RAM in SuperMicro SC512L-260B 1U cases. I can sell them for $200 each, non-negotiable unless you'd like to give me more for some reason. ;)
I also have an old HP Pavillion 4453 with an AMD K6-380 and 6-8GB HDD (I'll check if anyone is interested) with the matching 15" CRT monitor. It's got the stock 64MB DIMM in it, but I have extras so I can throw in a 128MB DIMM or two if interested too. An old Monorail workstation with a Tyan Tigercub 100 ( S1894) and a Celeron 400. I also just put together a tower with a Tualatin P3-S 1.26GHz on a DFI CM33-TL Rev C mobo if there is interest for it (48-bit LBA and USB booting) 512MB w/ 20GB IDE & CD-ROM. The Tualatin would match/beat most early P4 systems and use less power/put out less heat; it would make a fine setup to put a 1U hs/fan on and stick in a 1U case for a low power sever. Reasonable offers please.
Thanks, Jon.
UPDATE3: I found a nice 3 retaining nub HSF at SE yesterday, and I have since found out that the Azza KT133TX board I have doesn't do the 133MHZ DDR bus the Applebred Duron 1.4 I have needs. The board starts to post be never makes it past the memory check and sometimes doesn't even get to start that; it's just not capable of working with this level of Duron.
Thus I've got more stuff to sell: $10 - Azza KT133TX Rev 1.2 mobo, 1 ISA, 5 PCI, 1 AMR, 1 AGP, 100Hz DDR FSB Socket A, 3 pc100/133 SDRAM slots, includes HSF. Not tested much as I have no other Socket A CPU to use that would work in it.
Offer - AMD Duron 1.4GHz DHD1400DLV1C -- working pull from a system that was upgraded to an Athlon XP 2100+. The prices for these are all over the board
Thanks, Jon.
-
Jon Pruente