yup.. dam fingers ! its 10. not 101. See what happens when manually updating several text files? i moved from 192. to 10. nets
host3 is a printserver box from trendmicro http://www.trendnet.com/asp/download_manager/list_subcategory.asp?SUBTYPE_ID...
nice little box.
Still have an issue.... printserver pings fine now
=================================== from host1 ping scribe-01 PING scribe-01.home.hanaden.com (10.1.1.10) 56(84) bytes of data. 64 bytes from scribe-01.home.hanaden.com.1.1.10.in-addr.arpa (10.1.1.10): icmp_seq=1 ttl=32 time=0.716 ms
but can connect to it. nmap reports nothing. All 1663 scanned ports on scribe-01.home.hanaden.com.1.1.10.in-addr.arpa (10.1.1.10) are: filtered
=================== from host2 - the router --- 10.1.1.10 ping statistics --- 22 packets transmitted, 0 packets received, 100% packet loss
everything is on the same hw and cables as when it worked on 192....
Jason Munro wrote:
On 11:34:52 am 08/31/05 "Jeremy Fowler" JFowler@westrope.com wrote:
Default gateway for host1 is set to 10.1.1.2, change to 10.1.1.1
Umm.. no. The default gateway is for any request outside the local subnet and if 10.1.1.2 is the router out then this is correct. The routing table for host1 shows that no gateway is required for 10.1.1.0/24 and that all else (0.0.0.0) should be shoved out 10.1.1.2.
host3 = 101.1.1.10 / mask 255.255.255.0
If this is correct then this is the problem since 101.1.1.10 is not on the same subnet as host1 and therefore requests are being sent out the router. I wonder if host3 is actually online? If the above is a typo and host3 is actually 10.1.1.10 then maybe you should try resetting the switch because your routing tables look ok AFAIKT.
__ Jason Munro __ jason@stdbev.com __ http://hastymail.sourceforge.net/