I've had problems with setups like this: PM : HD PS : CDROM SM : none SS : CDRW [note this was by accident and I changed the jumper to make SS into SM to fix] PM : HD PS : none SM : present but not detected SS : CDRW [I fixed this by moving the CDRW from SS to PS] PM : HD PS : none SM : CDRW SS : HD [see above, also was able to fix by setting HD to CableSelect mode] I think the problems I had were due to a flaky HD. So the short answer is: no it's not just you. I think that some HDs are just flaky. What brand of HD was it? Mine was either a Conner or Seagate or WD. The PM being a Quantum Fireball. Of course it's also best to *not* mix HD brands, or even oftentimes product lines. Brian Densmore
-----Original Message----- From: djgoku
Computer Setup:
Primary Master: Hard Drive Primary Slave: Nothing Present Secondary Master: Hard Drive #but no hard drive was presenting when trying to boot to cd. Secondary Slave: DVD Player
I was trying to boot from the cdrom and it wasn't showing up in POST just the primary master hard drive. So I took the PM Hard drive out and just let the secondary boot by itself worked like a charm. I got it to work with the the below setup. Is this just me or does the bus not get scanned if a Secondary Master is present? Kinda weird I would think it would. This is probably the first time I have tried to boot from SM not present. Kinda weird though either way.
Primary Master: Hard Drive Primary Slave: DVD Player Secondary Master: Hard Drive Secondary Slave: Nothing Present
Hitachi Deskstar. All jumpers where set right (master,slave). I bet cable select would of worked. I don't really have time to mess just get it working =). Thanks, Jonathan On Fri, 10 Dec 2004 10:58:47 -0600, Brian Densmore <DensmoreB@ctbsonline.com> wrote:
I've had problems with setups like this:
PM : HD PS : CDROM SM : none SS : CDRW [note this was by accident and I changed the jumper to make SS into SM to fix]
PM : HD PS : none SM : present but not detected SS : CDRW [I fixed this by moving the CDRW from SS to PS]
PM : HD PS : none SM : CDRW SS : HD [see above, also was able to fix by setting HD to CableSelect mode]
I think the problems I had were due to a flaky HD. So the short answer is: no it's not just you. I think that some HDs are just flaky. What brand of HD was it? Mine was either a Conner or Seagate or WD. The PM being a Quantum Fireball. Of course it's also best to *not* mix HD brands, or even oftentimes product lines.
Brian Densmore
-----Original Message----- From: djgoku
Computer Setup:
Primary Master: Hard Drive Primary Slave: Nothing Present Secondary Master: Hard Drive #but no hard drive was presenting when trying to boot to cd. Secondary Slave: DVD Player
I was trying to boot from the cdrom and it wasn't showing up in POST just the primary master hard drive. So I took the PM Hard drive out and just let the secondary boot by itself worked like a charm. I got it to work with the the below setup. Is this just me or does the bus not get scanned if a Secondary Master is present? Kinda weird I would think it would. This is probably the first time I have tried to boot from SM not present. Kinda weird though either way.
Primary Master: Hard Drive Primary Slave: DVD Player Secondary Master: Hard Drive Secondary Slave: Nothing Present
_______________________________________________ Kclug mailing list Kclug@kclug.org http://kclug.org/mailman/listinfo/kclug
-- dj_goku -www.djgoku.com- -www.tektronic.org-
LOL, funny a friend of my hot swapped my cd-rw drive... I don't think it works like it used too. On Fri, 10 Dec 2004 11:09:03 -0600, djgoku <djgoku@gmail.com> wrote:
Hitachi Deskstar. All jumpers where set right (master,slave). I bet cable select would of worked. I don't really have time to mess just get it working =).
Thanks,
Jonathan
On Fri, 10 Dec 2004 10:58:47 -0600, Brian Densmore <DensmoreB@ctbsonline.com> wrote:
I've had problems with setups like this:
PM : HD PS : CDROM SM : none SS : CDRW [note this was by accident and I changed the jumper to make SS into SM to fix]
PM : HD PS : none SM : present but not detected SS : CDRW [I fixed this by moving the CDRW from SS to PS]
PM : HD PS : none SM : CDRW SS : HD [see above, also was able to fix by setting HD to CableSelect mode]
I think the problems I had were due to a flaky HD. So the short answer is: no it's not just you. I think that some HDs are just flaky. What brand of HD was it? Mine was either a Conner or Seagate or WD. The PM being a Quantum Fireball. Of course it's also best to *not* mix HD brands, or even oftentimes product lines.
Brian Densmore
-----Original Message----- From: djgoku
Computer Setup:
Primary Master: Hard Drive Primary Slave: Nothing Present Secondary Master: Hard Drive #but no hard drive was presenting when trying to boot to cd. Secondary Slave: DVD Player
I was trying to boot from the cdrom and it wasn't showing up in POST just the primary master hard drive. So I took the PM Hard drive out and just let the secondary boot by itself worked like a charm. I got it to work with the the below setup. Is this just me or does the bus not get scanned if a Secondary Master is present? Kinda weird I would think it would. This is probably the first time I have tried to boot from SM not present. Kinda weird though either way.
Primary Master: Hard Drive Primary Slave: DVD Player Secondary Master: Hard Drive Secondary Slave: Nothing Present
_______________________________________________ Kclug mailing list Kclug@kclug.org http://kclug.org/mailman/listinfo/kclug
-- dj_goku -www.djgoku.com- -www.tektronic.org-
-- dj_goku -www.djgoku.com- -www.tektronic.org-
participants (2)
-
Brian Densmore -
djgoku