Forced routing
Kelly McLaughlin
kelmac at mokancomm.net
Tue Nov 13 14:14:50 CST 2007
Greetings all, ( Hi Monty and Jim )
I need to specify communication from a multicast IP to communicate on a
specific Network Card. My routing table appears as follows:
Destination Gateway Genmask
Flags MSS Window irtt I Face
216.198.99.0 0.0.0.0 255.255.255.192
U 0 0 0
eth1
10.0.0.0 0.0.0.0 255.255.255.0
U 0 0 0
eth0
169.254.0.0 0.0.0.0 255.255.0.0
U 0 0 0
eth1
0.0.0.0 216.198.99.254 0.0.0.0
UG 0 0 0
eth1
I have 2 network cards. One with the adress of 216.198.99.247 and a second
NIC with an adress of 10.0.0.2. The NIC with the 10. address is what I want
to use for a failover communication with a second server. The failover
communication software uses a multicast address of 229.255.0.1. The
default gateway is attached to the 216. network. And ping tests result in
the following: Pinging from 10. NIC I can only receive replies from the
other 10. address. From the 216. NIC I receive replies from everything but
I cannot establish the failover on this NIC.
What I want to do is tell my computer ( Red Hat Enterprise Linux V.3 ) to
force communication from 229.255.0.1 across the 10.0.0.2 network card. If I
can accomplish this I believe my failover will work.
Thank you very much in advance for your assistance.
Note: I am not a Linux professional so please be very clear about
suggestions.
Thanks Again,
Kelly McLaughlin
Tech Support
Mokan Dial Inc.
Louisburg, Ks.
913-837-2219 Ext. 16
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://kclug.org/pipermail/kclug/attachments/20071113/2065d971/attachment.htm
More information about the Kclug
mailing list